Icom IC-7100 Advanced Instructions page 190

Previous view
9
D-STAR OPERATION <ADVANCED>
Repeater list programming (Continued)
14. UTC Offset programming
UTC (Universal Time Coordinated) offset is the time
difference between UTC and repeater local time. This
item enables you to check the destination repeater's
time when you make a gateway call. (p. 9-44)
$8 Touch [√](D).
$9 Touch "UTC OFFSET" to enter the UTC offset edit
mode.
%0 Touch [+] or [–](D) one or more times to input the
time difference between UTC and the local time.
• If desired, touch the UTC offset for 1 second to open the
Function set window, and then touch the "Clear" to delete
the UTC offset.
%1 After entering, touch [](D).
15. Storing the repeater list
%2 Touch "<<Add Write>>."
%3 Touch [YES](D).
• The programmed contents are stored to the repeater list,
and the display returns to the RPT LIST screen.
To cancel the programmed data:
To cancel the programmed data, push
display "Cancel edit?."
Touch [YES](D) to cancel programming and the dis-
play returns the RPT LIST screen.
L eft D isplay R ight
C enter
(C) to
MENU
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
* "<<Overwrite>>" appears when "Edit" is selected
in [1. Repeater group selection].
9-37
Touch
"UTC OFFSET"
Touch
[+]/[–]
[]
Touch
Touch
"<<Add Write>>"
*
Touch [YES]
Example:
"East Tokyo" is
added . "