D Making A Gateway Call - Icom IC-7100 Advanced Instructions

Previous view
8
D-STAR OPERATION <BASIC>
D-STAR Operating procedures (Continued)

D Making a Gateway call

1. Set "FROM" (Access repeater)
Push (C) to select the DR mode.
q
DR
Check whether or not "FROM" is selected.
w
• If "FROM" is not selected, touch the "FROM" field.
Touch the "FROM" field.
e
• The "FROM SELECT" screen appears.
Touch "Repeater List."
r
• The "REPEATER GROUP" screen appears.
Touch the repeater group where your access repeat-
t
er is listed.
• Example: "11: Japan"
Touch your access repeater.
y
• Example: "Hirano"
• The transceiver returns to the DR mode screen, and the
selected repeater is set in "FROM."
L eft D isplay R ight
C enter
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
"FROM" is selected.
Repeater area
(Sub name)
8-3
Touch
"FROM."
Touch
"Repeater List."
Touch the re-
peater group
( Example:
"11: Japan")
Touch your ac-
cess repeater.
( Example:
"Hirano")
Repeater call sign
"Hirano" is set
in "FROM."
Continued on the next page.
☞