Continue To Record Even If No Signals Are Received - Icom IC-7100 Advanced Instructions

Previous view
14
VOICE MEMORY FUNCTION

Continue to record even if no signals are received

In the default settings, the transceiver records audio
only while receiving signals (the squelch is open).
If you want to continue recording even if no signal is
received, do the following steps.
Push (C) to enter the Set mode.
q
SET
Touch the "RX REC Condition" item of the "Voice
w
Memo" Set mode.
( Voice Memo > QSO Recorder > Recorder Set >
RX REC Condition)
• If the specified item is not displayed, touch [∫] or [√](D)
one or more times to select the page.
Touch "Always" to continuously record even if no sig-
e
nal is received.
• Always: Recording continues, even if no signals
are received.
• Squelch Auto: The transceiver records audio only while
receiving signals (the squelch opens).
Push (C) to exit the Set mode.
r
SET
L eft D isplay
C enter
14-9
The L, R, C or D in the
R ight
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
SET
Touch
"Voice Memo."
Touch
"QSO Recorder."
Touch
"Recorder Set."
Touch
"RX REC Condition."
(Example)
Touch "Always."