Skip Settings For The Dr Scan; D Individual Skip Setting - Icom ID-51A Advanced Manual

Previous view
9
D-STAR OPERATION <ADVANCED>

■ Skip settings for the DR scan

You can set unnecessary repeaters as scan skip tar-
gets. The selected repeaters are skipped during scan-
ning for faster selection and scanning.
You can set the skip setting to all repeaters in the se-
lected repeater group, or individual repeaters.
TIP: When a repeater is set as a skip target, its "USE
(FROM)" setting is automatically set to "NO." In this
case, the repeater cannot be selected in "FROM" (Ac-
cess repeater).

D Individual skip setting

q Push [MENU] .
w Push D-pad( ) to select the root item ("DV Memo-

ry"), and then push D-pad(Ent).
D-pad
(Ent)
( )
e Push D-pad( ) to select "Repeater List," and then

push D-pad(Ent).
r Push D-pad( ) to select the repeater group that in-

cludes the repeater you want to set the skip setting
on, and then push D-pad(Ent).
t Push D-pad( ) to select the repeater to be skipped

during the DR scan.
y Push [QUICK] .
u Push D-pad( ) to select "SKIP," and then push D-

pad(Ent).
• "SKIP" appears on the selected repeater.
• Push [QUICK] and select "SKIP" again, then push
D-pad(Ent) to cancel the skip setting.
• When "SKIP All ON" is selected, push D-pad(Ent) to set
all repeaters in the group as skip targets.
TIP: When you select "Re-
peater List" on the FROM
SELECT screen, you can
set the skip settings in the
same way as described
above.
9-39
Select the repeat-
er group.
Select the repeat-
er to set the skip
setting
Appears