Programming A Memory Name - Icom IC-7100 Advanced Instructions

Previous view
15
VOICE TX FUNCTION

Programming a memory name

Each Voice TX memory, [T1] through [T4], can be pro-
grammed with an alphanumeric name of up to 16 char-
acters.
[EXAMPLE]: Programming the memory name "Con-
test" in [T1].
Push (C) one or more times to select the "M-
q
MENU
2" (Menu 2) screen.
• In the DR mode, select the "D1" screen.
Touch [VOICE]( D) to select the Voice TX mode.
w
• "VOICE TX" screen is displayed.
Push (C) to display the "VOICE" screen.
e
MENU
Touch [REC]( D) to display the "VOICE TX RECORD"
r
screen.
Touch the desired memory, "T1:" through "T4:," for 1
t
second to program.
Touch "Edit Name" to display the "VOICE TX RE-
y
CORD (T1)" screen (Voice TX name edit screen).
• A cursor appears and blinks.
Touch the desired block one or more times to
u
the desired character or symbol.
Selectable characters and symbols
A to Z, a to z, 0 to 9, ! # $ % & \ ? " ' ` ^
+ – ✱ ⁄ . , : ; = < > ( ) [ ] { } ¦ _ ¯ @ (space)
• Touch "AB⇔12" to toggle between the Alphabet input
and Number input mode.
• Touch [CLR](D) to delete the selected character, symbol
or number.
• Touch [ [AB] ](D) to open the input mode selection win-
dow.
• Touch "  " to input a space.
L eft D isplay
C enter
select
Memory name edit screen
Move the cursor
Input mode screen
15-4
The L, R, C or D in the
R ight
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
Touch [REC]
(Example)
Touch
for 1 second.
Touch
"Edit Name."
Move the cursor
Delete a character
Select an
input mode
Enter
Cancel edit
Input a space
Touch "(!"#)" to
open the Symbol
character selec-
tion window.
Continued on the next page.
☞
"T1:"