Copying Memory Contents; D Copying In The Memory Mode; Copy Ing In The Vfo Mode - Icom IC-7100 Advanced Instructions

Previous view
11
MEMORY OPERATION

Copying Memory contents

The Memory channel contents (frequency, operating
mode, and so on.) can be copied to the VFO.
Copying in the Memory mode
D
Touch the Memory channel number indication once
q
or twice to select the Memory mode. (p. 3-4)
Rotate [BANK]( L) or [M-CH](L) to select the Mem-
w
ory channel to be copied.
• "BLANK" appears if the selected Memory channel is a
blank channel. In this case nothing can be copied.
Touch [V/M]( D) for 1 second to copy the Memory
e
channel contents into the VFO.
Touch the Memory channel number indication to se-
r
lect the VFO mode. (p. 3-4)
D Copying in the VFO mode
In the VFO mode, select the Memory channel num-
➥
ber to be copied. And then, touch [V/M] for 1 second
to copy the Memory channel contents into the se-
lected VFO.
• "BLANK" appears if the selected Memory channel is a
blank channel. In this case nothing can be copied.
L eft D isplay
C enter
11-9
The L, R, C or D in the
R ight
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
Touch [V/M]
for 1 second.
The Memory
channel contents
are transferred into
the selected VFO.
( The display does
not change.)
Touch [V/M].