Display Type Setting - Icom IC-7100 Advanced Instructions
Hf/vhf/uhf all mode transceiver
Hide thumbs
Also See for IC-7100:
- Service manual addendum (294 pages) ,
- Instruction manual (197 pages) ,
- Basic manual (96 pages)
Table of Contents
Advertisement
Previous view
9
D-STAR OPERATION <ADVANCED>
Display type setting
The display size in the DR mode, such as a repeater
name, call sign, and so on, can be set to Large.
Push
(C) to enter the Quick Set mode.
q
QUICK
Touch the "Display Type."
w
• If the specified item is not displayed, touch [∫] or [√](D)
one or more times to select the page
Touch "Large."
e
• The display size changes to the same size such as the
repeater name set in "TO" and "FROM."
L eft
D isplay
R ight
C enter
(Default: Normal)
.
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
Normal
9-12
Touch
"Display Type"
Touch
"Large"
Large
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the IC-7100 and is the answer not in the manual?
Questions and answers
IC-7100 is two months old. Power suddenly cut off. Fuses are OK. No obvious damage internally. Can something with the control head cause unit not to power up?
Yes, a control head issue can cause the Icom IC-7100 to not power up. The control head receives power through the extension cable with shielded RJ45 connectors. If there is high resistance in the power wires or a poor connection in the umbilical cable, it may prevent the control head from receiving enough power to function properly. Reseating both connectors may help resolve the issue.
This answer is automatically generated
re ICOM 7100. Digital mode operations leave the mike path inoperable. What protocols are required on the DV USB computer/transceiver cable? Transceiver control head display shows USB-D when the intent is USB.