D Transmitting An Rtty Memory - Icom IC-7100 Advanced Instructions

Previous view
4
RECEIVE AND TRANSMIT
The functions for RTTY operation (Continued)

D Transmitting an RTTY memory

Previously entered characters can be sent using the
RTTY memory. Contents of the memory are enter in
the RTTY Memory (Edit) screen.
In the RTTY mode, push
q
times to select the "M-2" screen (Menu M-2).
Touch [DEC]( D) to display the RTTY decoder
w
screen.
• Touch [WIDE](D) to toggle the decode screen size be-
tween normal and wide.
Touch [RTM]( D) to display the RTTY memory
e
screen.
Touch [ u](D) to select the memory group to trans-
r
mit.
• Touch [u](D) to toggle the memory group between RT1–
RT4 and RT5–RT8.
Touch one of the memory keys, [RT1] to [RT4], or
t
[RT5] to [RT8](D).
• The TX/RX indicator lights red.
• The TX contents are displayed beside the "
Push (C) to return to the "M-2" screen (Menu
y
MENU
M-2).
For your information
When an external keypad is connected to [MIC] con-
nector on the Controller, one of RT1 to RT4 RTTY
memory contents can be transmitted while the RTTY
decode screen is selected in the RTTY mode. (pp.
4-15, 19-9)
L eft D isplay R ight
C enter
(C) one or more
MENU
" icon.
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
RTTY memory screen (RT1–RT4)
RTTY memory screen (RT5–RT8)
• Transmits RT6
The TX contents are displayed
4-17
Touch [DEC]
Touch [RTM]
Touch [RT6]
" " blinks