Speech Function; D To Announce The Received Call Sign - Icom IC-7100 Advanced Instructions

Previous view
9
D-STAR OPERATION <ADVANCED>

Speech function

The speech function announces the called station call
sign, or the individual or station call sign that is selected
from the RX History.
It is convenient when you cannot watch the LCD, or you
missed the call's audio.
This function helps you to know the call sign of the call-
er station without seeing the LCD.

D To announce the received call sign

The received call sign can be announced.
Push (C) to enter the Set mode.
q
SET
Touch the "RX Call Sign SPEECH" item of the
w
"SPEECH" Set mode.
SPEECH > RX Call Sign SPEECH
• If the specified item is not displayed, touch [∫] or [√](D)
one or more times to select the page
Touch the desired item to select "ON (Kerchunk)" or
e
"ON (All)."
• ON (Kerchunk): When a DV call is received, and if the
call time is short, the calling station's call
sign is announced. (Default)
• ON (All): When a DV call is received, the calling
station's call sign is announced.
Push (C) to exit the Set mode.
r
SET
• When a DV call is received, the standby beep sounds,
and after approximately 1 second, the call sign is an-
nounced.
NOTE:
• Even if a "/" and a note are after a call sign, they are
not announced.
• The announced contents cannot be recorded on
the SD card.
• The IC-7100 has other Speech functions:
S-Level speech function
The S-meter level is announced before the frequency
and mode is announced by pushing
(C) > SPEECH > S-Level SPEECH)
(
SET
Mode speech function
The selected operating mode is announced when
mode is selected.
( (C) > SPEECH > MODE SPEECH)
SET
• When the digital squelch function is used, and if a
received signal is not addressed to your call sign,
or does not include an unmatched digital code, the
calling station's call sign is not announced.
.
• When "ON (Kerchunk)" is selected
(C).
SPEECH
• When "ON (All)" is selected
9-18
L eft D isplay R ight
C enter
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
Touch
"SPEECH"
Touch
"RX Call Sign
SPEECH"
Touch
"ON
(Kerchunk)" or
"ON (All)"
Example:
ON (All)
SET
Push