From" (Access Repeater) Setting - Icom IC-7100 Advanced Instructions

Previous view
8
D-STAR OPERATION <BASIC>

"FROM" (Access repeater) setting

Your access repeater must be set to "FROM" when you
transmit a call in the DR mode.
You have four ways to set the access repeater.
Click the title shown below to jump to the specified
page.
Setting by the Dial
Select the preset repeater by rotating the Dial or [M-CH]
Or, rotating [BANK] (L) selects the repeater group.
• When you know your access repeater
From the repeater list (p. 8-9)
When your access repeater is preloaded in your trans-
ceiver's repeater list, you can select it by selecting the
repeater area or name.
• When you don't know which repeater you can access.
Search for a repeater using the DR mode
scan (p. 8-10)
Searches for DV signals from a repeater or a
simplex frequency.
Search for the nearest repeater (p. 8-11)
Searches for the nearest repeater by using your own
and the repeater's location.
The nearest repeaters in your transceiver's repeater
list are displayed as the available choices.
• When the "FROM" data is stored in the TX History.
Setting from the TX History (p. 8-13)
Select a repeater that you have accessed before, from
the TX History record.
"Hirano" repeater
is set in "FROM."
(L) on the DR mode screen.
Blinks
While DR mode scanning
8-8
DR mode screen