Dtx Message Deleting - Icom IC-7100 Advanced Instructions

Previous view
9
D-STAR OPERATION <ADVANCED>
Message operation (Continued)
D TX message deleting
The programmed TX message can be deleted, as
described below.
Push (C) to enter the Set mode.
q
SET
Touch the "TX Message" item of the "My Station" Set
w
mode.
My Station > TX Message
• If the specified item is not displayed, touch [∫] or [√](D)
one or more times to select the page.
Touch the desired message memory number for 1
e
second.
(Example: 1:)
Touch the "Clear" item.
r
• The confirmation screen "Clear?" appears.
Touch [YES](
t
D).
Push (C) to exit the Set mode.
y
SET
L eft D isplay R ight
C enter
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
Example: To delete the programmed TX message "JAPAN
>TOM" from message memory number 1.
9-6
Touch
"My Station"
Touch
"TX Message"
Touch the
message
memory for 1
second
(Example: 1:)
Touch
"Clear"
Touch
[YES]
Push SET