D Skip Setting For The Dr Scan - Icom IC-9700 Advanced Manual

10. D-STAR OPERATION (ADVANCED)
Entering new information into the repeater list

D Skip setting for the DR scan

You can set repeaters as scan skip repeaters. The
selected repeaters are skipped for faster scanning.
You can set the skip setting to all repeaters in the
selected repeater group, or to individual repeaters.
L When a repeater is set as a skip repeater, its "USE
(FROM)" setting is automatically set to "NO." In that
case, the repeater cannot be selected in "FROM"
(Access repeater) on the DR screen.
<Individual skip setting>
1. Open the REPEATER GROUP screen.
» (2) > DV/DD Memory > Repeater List
MENU
2. Select a repeater group where the repeater you
set the skip setting is listed.
3. Touch the repeater to be skipped for 1 second.
4. Touch "SKIP."
• Displays "SKIP" in the upper right corner.
LSelect "SKIP" again to cancel the skip setting.
L Select "SKIP All ON" to set the skip setting to all
repeaters in the group.
5. Push
several times
EXIT
screen.
to close the Repeater List
<Group skip setting>
On the REPEATER GROUP screen, push
then select "SKIP All ON" to skip the repeaters in the
group during the DR scan.
L To cancel the skip settings in the group, select "SKIP All
OFF."
TIP:
• When you select "Repeater List" on the FROM
SELECT screen, you can set the skip setting as
described to the left.
• When "FROM" is selected on the DR screen,
push to set the skip setting, as shown
QUICK
below.
Rotate
MAIN DIAL
LDisplays "SKIP" in the "FROM" field.
10-33
QUICK
to select SKIP, then touch it.
,