Others Set Mode; Clone Mode - Icom IC-7100 Advanced Instructions

Previous view
17
SET MODE

Others Set mode

Version
Others > Information > Version (VERSION)
Shows the transceiver firmware's version number.

Clone Mode

Others > Clone > Clone Mode
Select to read or write the CS-7100 data from or to the
PC, and/or to receive data from a Master transceiver.
See page 19-5 for details.
Clone Master Mode
Others > Clone > Clone Master Mode
Select to write your IC-7100 (Master) data to another
IC-7100 (Sub).
See page 19-5 for details.
Touch Screen Calibration
Others > Touch Screen Calibration
Touch to adjust the touch screen.
See page 19-10 for details.
Partial Reset
Others > Reset > Partial Reset
A Partial reset resets operating settings to their default
values (VFO frequency, VFO settings, menu contents)
without clearing the items below:
See page 19-3 for details.
All Reset
Others > Reset > All Reset
Reset the CPU, if the internal CPU malfunctions due to
static electricity, and so on. All reset clears all program-
ming and returns all settings to their factory defaults
(including the programmed data you purchased).
Therefore, after the All resetting, you cannot use the
transceiver in the DR mode until reprogramming the
repeater list.
See page 19-4 for details.
Recommend!
✓
Before the All resetting, we recommend you save the
programmed data you purchased onto an SD card.
See page 13-6 for details.
17-31