Previous view
17
SET MODE
Voice Memo Set mode (Continued)
File Split
Voice Memo > QSO Recorder > Recorder Set > File
Split (File Split)
Turn the File Split function ON or OFF.
• OFF: When the recording starts, a new file is auto-
matically created in the folder of the SD card.
The audio is continuously recorded into the
file, even if transmission and reception, or the
squelch status (open and close) is switched.
If the file size exceeds 2 GB, a new file is au-
tomatically created in the same folder, and the
audio is recorded there.
• ON: When the recording starts, a new file is auto-
matically created in the folder of the SD card.
During recording, and if transmission and re-
ception, or squelch status (open and close) is
switched, a new file is automatically created in
the same folder, and the audio is saved into the
new one.
PTT Auto REC
Voice Memo > QSO Recorder > Recorder Set > PTT
Auto REC (PTT Auto REC)
Turn the PTT Automatic Recording function ON or
OFF.
Recording starts when a signal is transmitted from an
external speaker microphone, the VOX functions or a
CI-V command is sent.
• OFF:The recording does not start even if a signal is
transmitted.
• ON: The recording automatically starts when a sig-
nal is transmitted.
The recording will stop when:
• No signal is transmitted for 10 seconds after the last
transmission.
• No signal is received for 10 seconds after the last
transmission.
- 10 minutes after the last transmission while the
squelch is open (SSB/CW/RTTY/AM modes.)
- A signal is received within 10 seconds after the last
transmission, the received signal is also recorded.
A signal is received within 10 seconds after the last
reception, the received signal is also recorded.
• The frequency or operating mode is changed while
transmitting.
• The operating method (V/M, CALL, DR, M-CH, Band
Stacking Register, and so on) has been changed.
Skip Time
(Default: ON)
Voice Memo > QSO Recorder > Player Set > Skip Time
(Skip Time)
Set the SkipTimer to 3, 5, 10 or 30 seconds to rewind
or skip forward for this set period when you push the
fast-rewind or fast-forward key.
• See "Operation while playing back" for forwording or rewind-
ing. (p. 14-5)
DV Auto Reply
Voice Memo > DV Auto Reply (DV AUTO REPLY)
Up to 10 seconds of audio can be recorded for the au-
tomatic reply function.
See page 9-15 for details of recording audio.
(Default: OFF)
17-12
Be sure to insert an SD card into the transceiver be-
fore selecting this item.
(Default: 10sec)
Need help?
Do you have a question about the IC-7100 and is the answer not in the manual?
Questions and answers
IC-7100 is two months old. Power suddenly cut off. Fuses are OK. No obvious damage internally. Can something with the control head cause unit not to power up?
Yes, a control head issue can cause the Icom IC-7100 to not power up. The control head receives power through the extension cable with shielded RJ45 connectors. If there is high resistance in the power wires or a poor connection in the umbilical cable, it may prevent the control head from receiving enough power to function properly. Reseating both connectors may help resolve the issue.
This answer is automatically generated