D Recording An Auto Reply Voice Announcement; D Playing Back The Recorded Voice Audio - Icom IC-7100 Advanced Instructions

Previous view
9
D-STAR OPERATION <ADVANCED>
Automatic Reply function (Continued)

D Recording an Auto Reply voice announcement

The Auto Reply voice announcement can be recorded
and saved on the SD card to reply to the call with your
voice.
NOTE: Be sure to insert an SD card to the [SD] slot
of the transceiver before starting to record a voice
announcement.
Push (C) to enter the Set mode.
q
SET
Touch the "DV Auto Reply" item of the "Voice Memo"
w
Set mode.
Voice Memo > DV Auto Reply
• If the specified item is not displayed, touch [∫] or [√](D)
one or more times to select the page
Push [PTT] on the microphone to start recording.
e
(No RF is transmitted)
• After releasing [PTT] on the microphone, the recording is
cancelled.
• Maximum record period is 10 second
• Hold the microphone 5 to 10 cm (2 to 4 inches) from your
mouth, then speak into the microphone at a normal voice
level.
• Only one announcement can be recorded. The current
contents will be overwritten if you record again.
Push (C) to exit the Set mode.
r
SET

D Playing back the recorded voice audio

The recorded voice audio for
be played back.
Push (C) to enter the Set mode.
q
SET
Touch the "DV Auto Reply" item of the "Voice Memo"
w
Set mode.
Voice Memo > DV Auto Reply
• If the specified item is not displayed, touch [∫] or [√](D)
one or more times to select the page
Touch the [ ≈](D) to start the playback.
e
Push (C) to exit the Set mode.
r
SET
L eft D isplay R ight
C enter
.
can
the Auto Reply function
.
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
Audio level is displayed
While playing back
Information
✓
You can delete the recorded audio.
On the DV AUTO REPLY screen, push
➥
and then touch the "Clear."
9-15
Touch
"Voice Memo"
Touch
"DV Auto Re-
ply"
Touch []
While
recording
Touch
"[MIC GAIN]"
Adjust the Mic
gain that the
REC Level
does not reach
to this range
Recording time
is displayed
(C),
QUICK