Icom IC-7100 Advanced Instructions page 307

Previous view
17
SET MODE
Set mode items and Default settings (Continued)
NOTE: The default settings shown below in bold are for the USA version.
The default settings may differ, depending on your transceiver version.
SPEECH
RX Call Sign SPEECH
RX>CS SPEECH
S-Level SPEECH
MODE SPEECH
SPEECH Language
Alphabet
SPEECH Speed
SPEECH Level
QSO/RX Log
1
QSO Log*
1
RX History Log*
CSV Format
Separator/Decimal
Date
1
* Be sure to insert the SD card into the transceiver before selecting these items.
* 2 The default value may differ, depending on the transceiver version.
In this item, set the Speech options.
OFF, ON (Kerchunk) or ON (All)
OFF or ON
OFF or ON
OFF or ON
English or Japanese
Normal or Phonetic Code
Slow or Fast
0%~50%~100%
In this item, set the QSO/RX History Log options.
OFF or ON
OFF or ON
Sep [,] Dec [.]* 2 , Sep [;] Dec [.] or Sep
[;] Dec [,]
mm/dd/yyyy*
yyyy/mm/dd,
dd/mm/yyyy
17-4
Selects the RX call sign speech function option
while ON, or turn it OFF.
Turns the RX>CS Speech function ON or OFF.
Turns the Signal Strength Level Speech function
ON or OFF.
Turns the Operating Mode Speech function ON
or OFF.
Selects either English or Japanese as the de-
sired speech language.
Selects the alphabet character announcement
type.
Selects Slow or Fast speech speed.
Sets the volume level for the voice synthesizer.
Selects whether or not to make a communication
log on the SD card.
Selects whether or not to make a DV mode's re-
ceive history log on the SD card.
Selects the separator and the decimal character
for the CSV format.
2
or Selects the date format.