Dgps Group Name Programming - Icom IC-7100 Advanced Instructions

Previous view
10
GPS/GPS-A OPERATION
Adding or editing GPS memory (Continued)
D GPS group name programming
You can register the name of each GPS group.
Push (C) to enter the Set mode.
q
SET
Touch the "GPS MEMORY" item of the "GPS" Set
w
mode.
GPS > GPS Memory
• If the specified item is not displayed, touch [∫] or [√](D)
one or more times to select the page.
Touch the desired group for 1 second to edit between
e
group "A" to "Z."
Touch "Edit Name."
r
• The "GROUP NAME" screen is displayed to edit the
group name.
Enter the name touching the desired block one or
t
more times to select the desired character, number
or symbol.
• Touch "AB12" to toggle between the Alphabet input
and number input mode.
• Touch [ [AB] ] and select "ab" to enter the lower case let-
ters.
• Touch [CLR](D) to delete the selected character, symbol
or number.
• Touch "  " to input a space.
Touch [ ] or [ ]
y f (D) g (D)
and forward.
Repeat steps t and y to program up to 16 charac-
u
ters of a GPS group name (space included).
Touch [ENT]
i
(D) when the programming is completed.
• Returns to the "GPS MEMORY" screen.
L eft D isplay R ight
C enter
to move the cursor backward
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
Name programming
Character type selection screen
10-11
Touch for
1 second.
Moves the cursor.
Clears a character.
Character
type selection.
Touch after enter-
ing.
Cancels and
Space returns to the
previous screen.
Touch [ab] to select
the lower case
letters.
Example;
"Point 04"
is entered.