D Keyer Set Mode - Icom IC-7100 Advanced Instructions

Previous view
4
RECEIVE AND TRANSMIT
Electronic keyer functions (Continued)

D Keyer Set mode

This Set mode is used to set the CW sidetone, memory
keyer repeat time, dash weight, paddle specifications,
keyer type, and so on.
• Setting contents
q In the CW mode, push
to select the "M-2" screen (M-2 menu).
w Push [KEYER](D) to display the "KEYER SEND"
screen.
• If the "KEYER" (Root) screen is displayed, skip step e.
Push (C) to display the "KEYER" screen.
e MENU
Touch [SET]( D) to enter the "KEYER SET" screen.
r
Touch the desired item to select.
t
• See the next page for details of the set items and op-
tions.
Touch the desired option or rotate the Dial to change
y
the value.
• If desired, touch the item for 1 second to open the De-
fault set window, then select the "Default" to reset to the
default setting.
Touch [ ](D) or push
u
"KEYER" (Root) screen.
(C) one or more times
MENU
(C) to return to the
MENU
L eft D isplay
C enter
• Keyer Set mode
"KEYER" screen (Memory Keyer)
(Example: Touch the "Side Tone Level.")
4-10
The L, R, C or D in the
R ight
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
Touch [SET]
Moves to the
next page
Returns to the
previous page