Your Setting Is Correct - Icom IC-7100 Advanced Instructions

Previous view
9
D-STAR OPERATION <ADVANCED>

Your setting is correct?

If you make a Local Area call with the Gateway call set-
ting, the destination repeater, selected in "TO," will be
busy while you transmit.
So the station that uses that repeater as their Access
repeater cannot access it, as shown below.
BE SURE to set CQCQCQ in "TO" when you intend to
make a local call, or after you finish a Gateway call.
Example: JM1ZLK wants to make a Local Area call.
Caller
(JM1ZLK)
JM1ZLK's setting
The destination ("TO") setting is incorrect.
Correct setting
To make a Local Area call, set the destina-
tion ("TO") to "CQCQCQ."
See page 8-15 for details.
Hamacho repeater
Hamacho area
9-50
Hirano repeater
Hirano area
NOTE: With this setting, the
Local Area call can be made,
but the destination repeater,
selected in "TO," is also busy
while you transmit.
So the station that uses that
repeater as their Access re-
peater cannot access it.
Called