D Storing A Non Standard Repeater - Icom IC-7100 Advanced Instructions

Previous view
4
RECEIVE AND TRANSMIT
Repeater operation (Continued)

D Storing a non standard repeater

While the "M-1" menu is selected, touch [A/B](
q
select VFO A.
Rotate the Dial to set the repeater output frequency.
w
Touch [A/B]( D) to select VFO B.
e
Rotate the Dial to set the repeater input frequency.
r
t Push (C) to display the "M-2" screen (M-2
MENU
menu), then touch [TONE](D) to turn ON the previ-
ously set tone encoder.
y Push (C) to display the "M-1" screen (M-1
MENU
menu), then touch [A/B](D) to select VFO A.
Touch [SPLIT]( D) to turn ON the Split function.
u
Rotate [M-CH]( L) to select the desired memory
i
channel.
• "BLANK" appears when a blank channel is selected.
• Rotate [BANK](L) to select the desired bank, if needed.
Touch [MW]( D) for 1 second to store the set con-
o
tents into the selected memory channel.
L eft D isplay R ight
C enter
D) to
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
"M-1" menu
"M-2" menu
"M-1" menu
4-29
VFO A
Touch [A/B]
VFO B
Push (C)
MENU
Touch [TONE]
Push MENU (C)
Touch [A/B]
Touch [SPLIT]
Split icon
Touch [MW] for
1 second