D-Star Introduction - Icom IC-7100 Advanced Instructions
Hf/vhf/uhf all mode transceiver
Hide thumbs
Also See for IC-7100:
- Service manual addendum (294 pages) ,
- Instruction manual (197 pages) ,
- Basic manual (96 pages)
Table of Contents
Advertisement
Previous view
7
D-STAR INTRODUCTION
D-STAR Introduction
• In the original D-STAR (Digital Smart Technologies for
Amateur Radio) plan, JARL envisioned a system of
repeaters grouped together into Zones.
• The D-STAR repeater enables you to call a HAM sta-
tion on another repeater through the internet.
• The transceiver can be operated in the digital voice
mode, including low-speed data operation, for both
transmit and receive.
7-5
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the IC-7100 and is the answer not in the manual?
Questions and answers
IC-7100 is two months old. Power suddenly cut off. Fuses are OK. No obvious damage internally. Can something with the control head cause unit not to power up?
Yes, a control head issue can cause the Icom IC-7100 to not power up. The control head receives power through the extension cable with shielded RJ45 connectors. If there is high resistance in the power wires or a poor connection in the umbilical cable, it may prevent the control head from receiving enough power to function properly. Reseating both connectors may help resolve the issue.
This answer is automatically generated