D Tuning Off The S-Meter Announcement; D Tuning On The Mode Announcement - Icom IC-7100 Advanced Instructions
Hf/vhf/uhf all mode transceiver
Hide thumbs
Also See for IC-7100:
- Service manual addendum (294 pages) ,
- Instruction manual (197 pages) ,
- Basic manual (96 pages)
Table of Contents
Advertisement
Previous view
3
BASIC OPERATION
Voice synthesizer operation (Continued)
D Tuning OFF the S-meter announcement
The S-meter announcement can be turned OFF.
Push
(C) to enter the Set mode.
q
SET
Touch the "S-Level SPEECH" item of the "SPEECH"
w
Set mode.
SPEECH > S-Level SPEECH
• If the specified item is not displayed, touch [Y] or [Z](D)
one or more times to select the page.
Touch the option to turn OFF the function.
e
Push
(C) to exit the Set mode.
r
SET
D Tuning ON the MODE announcement
When this function is ON, the selected operating mode
is verbally announced when a mode is selected.
Push
(C) to enter the Set mode.
q
SET
Touch the "MODE SPEECH" item of the "SPEECH"
w
Set mode.
SPEECH > MODE SPEECH
• If the specified item is not displayed, touch [Y] or [Z](D)
one or more times to select the page.
Touch the option to turn ON the function.
e
Push
(C) to exit the Set mode.
r
SET
3-21
Touch
"SPEECH"
Touch "S-Level
SPEECH"
Touch "OFF"
Touch
"SPEECH"
Touch "MODE
SPEECH"
Touch "ON"
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the IC-7100 and is the answer not in the manual?
Questions and answers
IC-7100 is two months old. Power suddenly cut off. Fuses are OK. No obvious damage internally. Can something with the control head cause unit not to power up?
Yes, a control head issue can cause the Icom IC-7100 to not power up. The control head receives power through the extension cable with shielded RJ45 connectors. If there is high resistance in the power wires or a poor connection in the umbilical cable, it may prevent the control head from receiving enough power to function properly. Reseating both connectors may help resolve the issue.
This answer is automatically generated
re ICOM 7100. Digital mode operations leave the mike path inoperable. What protocols are required on the DV USB computer/transceiver cable? Transceiver control head display shows USB-D when the intent is USB.
How do I find the IO settings