Multiple Calling Members Assignment - Toshiba Strata CTX28 Programming Manual

Station
Multiple Call Group

518 Multiple Calling Members Assignment

Prerequisite Program:
Use this program to assign members to a group.
1. From the Program Menu, click Station
> Multiple Calling Group.
2. Click the Member tab.
3. Select the Index Number, then enter
the Member DN.
Important!
Note Each group can have up to 25 members. You can have up to 64 groups.
4. Submit is greyed out because the members are automatically submitted as they get added.
The buttons on this screen are dynamic. When you select an empty Index number, the Add button
Note
displays. When you select and existing Index number, the Modify and Remove buttons display.
Modify enables you to edit, while Remove deletes the multiple ringing group index number.
F
IELD
Multiple Calling Group Index
01 Member DN
05 Ringing Options
5-34
517
Immediate Destinations
can only be PDNs (Digital
and/or Standard
Telephones) and PhDNs.
Delay Destinations can be
PDNs of Standard
telephone circuits only and
Voice Mail Hunt Group
Pilot Numbers (not
Multiple DN Hunt Groups).
D
ESCRIPTION
Enter a group number.
Possible values: 1~16 (CTX100), 1~32 (CTX670 Basic) and
Enter the DN of the extension you wish to add.
Possible values: Up to 32 digits
Important!
•
Immediate Destinations can only be PDNs (Digital and/or Standard
Telephones) and PhDNs.
•
Delay Destinations can be PDNs of Standard telephone circuits only and
Voice Mail Hunt Group Pilot Numbers (not Multiple DN Hunt Groups).
Attendant Consoles cannot be members of multiple call groups and cannot
overflow to MC groups. Assigning Attendant Consoles to MC groups will
cause Attendant Consoles to misfunction. Do not set Attendant Consoles to
overflow to MC groups.
Select either: Immediate, Delay 1 or Delay 2.
1~64 (CTX670 Exp.)
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04