Toshiba Strata CTX28 Programming Manual page 163

F
IELD
13 Ringing Timer Delay 1
14 Ringing Timer Delay 2
15 Interdigit 1 Timer
16 Interdigit 2 Timer
17 Auto Camp-on
18 Calling Number ID
19 Intercept
20 Send Dial Tone
21 TGAC Override
22 Network COS
23 LCR Group
24 Change COS Override
Code
25 Register Speed Dial
Codes
26 Originator Invoke OCA
27 Senderized Tone Mode
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
D
ESCRIPTION
Select time to ring the Delay 1 destination.
Possible values: 1~60 sec. (default = 12)
Select time to ring the Delay 2 destination.
Possible values: 1~60 sec. (default = 24)
Select Interdigit 1 timer value.
Possible values: 1~180 sec. (default = 15)
Select Interdigit 2 timer value.
Possible values: 1~180 sec. (default = 5)
Select in box to toggle Automatic Camp-on.
Possible values: On (default) or Off
Select Calling Number Identification source.
Possible values: User Provided (default) or Network Provided
Enable Intercept. A call is transferred to a special destination called intercept
position when the destination of a trunk line call is not determined with DID, DIT or
DISA. Intercept is also activated when the destination is determined, but the call
cannot be terminated due to a defect or an incorrect number. If the system has a
simplified attendant console, the Attendant Console is usually specified to terminate
the call. This function ensures termination of a trunk line call.
Possible values: Enable or Disable (default)
Enable Send Dial Tone.
Possible values: Enable or Disable (default)
Enable Trunk Group Access Code (TGAC) override.
Possible values: Enable or Disable (default)
Enter the Network COS number.
Possible values: 1~32 (default = 1)
Enter the LCR Group number. Calls from this ILG cannot tandem if this field is not
entered.
Possible values: 1~16 (default = 1)
Enable authority to change COS Override Code.
Possible values: Enable or Disable (default)
Enable authority to create system speed dial codes.
Possible values: Enable or Disable (default)
Enable authority for the originator of a call to invoke OCA when encountering a
busy station.
Possible values: Enable or Disable (default)
Send DTMF tones as a complete number rather than digit-by-digit.
Possible values: Dial Tone (default), Entry Tone or Silence
Trunks
304 Incoming Line Group
6-3