Feature Buttons; Button Led Indications; Calling A Station - Toshiba Strata DK16 User Manual

STRATA DK ADD-ON MODULE / DSS CONSOLE ADD-ON MODULE

FEATURE BUTTONS

For the Strata DK8 ADM, the Night Transfer button places the system in
the Night mode, the All Call Page button accesses All Call Page, and the
eight personal Speed Dial buttons provide one touch dialing of frequently
used telephone numbers or feature access codes.
DSS buttons are used to call a station or transfer an outside call to a
station. A label identifies the station associated with each DSS button.
The ADM for Strata DK16 is equipped with 20 Direct Station Selection
(DSS) buttons. Each button has a label that identifies the station that is
associated with the button. Only DSS buttons can appear on the Strata
DK16 ADM.

BUTTON LED INDICATIONS

A DSS button LED on the ADM will be green and flashing when calling
or transferring an outside call to a station. (If calling a station, the LED
will turn red and steady when the called station answers; if transferring to
a station, the LED will turn red and steady when you hang up to complete
the transfer.)

CALLING A STATION

To call a station with a DSS button, only press the button associated with
the station—Do not press the Intercom button on your telephone. A
station call with a DSS button can be made on-hook or off-hook, and with
Voice First signaling or Tone signaling. After pressing the button, treat the
call like any other station call made with a digital or electronic telephone.
Each DSS button has an LED which indicates whether the associated
station is idle or busy. The LED will be lit and red if the station is busy
and not lit if idle.
1-2