Network Drl/Frl/Qpl Mapping Tables; Network Dn Table Assignment - Toshiba Strata CTX28 Programming Manual

658/659/660 Network DRL/FRL/QPL Mapping Tables

System Availability: Not available with CTX28
Prerequisite Program:
These commands are used to establish two mapping tables to equate local DRLs, FRLs and QPLs with
network DRLs, FRLs and QPLs for both outbound and inbound network calls.
F
IELD
Type
Network DRL/FRL/QPL
Local DRL/FRL/QPL

661 Network DN Table Assignment

System Availability: Not available with CTX28
Prerequisite Program:
This program assigns the PDN, PhDN or
Pilot DNs to a CTX node ID. This include
all DNs in all CTX nodes on the CTX
network, except the DNs in the node you
are currently programming (This feature is
available with CTX R2.2 or higher and
CTX WinAdmin R2.2G.0 and higher.)
This enables someone in one node to call
an extension in another node, without
having to dial the node ID number. The
caller dials the extension and the system
appends the Node ID. This function is
transparent to the caller and the dialed
party. (See Example.)
In Program 661, enter a Network DN,
followed by it's node MD. Repeat this process for each DN.
F
IELD
00
Network DN
01 Node ID
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
None
D
ESCRIPTION
Select the Network DRL/FRL/QPL type.
Possible values: Outbound or Inbound (default = no value)
Outbound – maps a local DRL/FRL/QPL to a Network DRL/FRL/QPL.
•
Inbound – maps a Network DRL/FRL/QPL to a local DRL/FRL/QPL.
•
Enter the Network DRL/FRL/QPL (for outbound) you want to map to a Local DRL/FRL/
QPL.
Possible values: DRL/FRL/QPL1~DRL/FRL/QPL16 (default = 1~16)
Enter the Local DRL/FRL/QPL (for inbound) you want to map to the Network DRL/FRL/
QPL selected in the Network DRL/FRL/QPL field above.
Possible values: 1~16 (default = 1~16)
None
D
ESCRIPTION
Enter the PDN, PhDN or Pilot DNs that should be assigned to a CTX Node ID. This
include all DNs in all CTX Nodes on the CTX network, except the DNs in the node you
are currently programming.
Possible values: 3000 (CTX670), 1000 (CTX100)
Five digits max. (Default = No Data)
Enter the CTX Node ID that should be assigned to the DN.
Possible values: Six digits max. (Default = No Data)
658/659/660 Network DRL/FRL/QPL Mapping Tables
Services
6958
9-59