System
100 Cabinet Slot PCB Assignments
5. Select the PCB Type. Use the drop down menu to select the PCB type. WinAdmin will start a refresh
cycle, watch the progress bar (lower right corner of PC screen) to verify when WinAdmin is complete.
The PCB type that was selected will appear in the PCB Type field.
6. Click Submit to save your data.
Notes
•
CTX100 – ASTU is always installed in virtual slot 09, as shown below .
•
CTX28 – the slots will always be populated as shown below and cannot be changed.
4-2
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
Only ASTU shows
for Slot 9
7377
7447