Toshiba Strata CTX28 Programming Manual page 469

Program Code
33
33
48
49
49
49
49
51
205
51
51
52
52
52
80
82
82
96
98
Strata CTX Programming - Part 4: Appendices 6/04
Sub-
FB
parameter
540 The door lock number entered is out of the range.
900 The application number entered is out of the range.
Required parameter for each Feature Code is not entered.
110 Two or more PhDNs with the same value are registered to
7
one extension.
700 Only Feature Code(s) allowed for Attendant Console is
790 registered.
800
7
810
820
830
610 Two or more DSSs with the same value are registered to one
7
extension.
120 While assigning sub-parameters to a DN: A DN was selected
130 that does not exist in the system.
7
560
610
The Primary DN entered conflicts with a value of an existing
7
numbering scheme.
110 The Primary DN entered conflicts with a value of an existing
numbering scheme.
120 When assigning an Owner DN to a CO or GCO, the related
7
130 CO or GCO buttons are not assigned to the respective FB(s)
of the owner's extension.
The Primary DN entered conflicts with a value of an existing
numbering scheme.
110 The Secondary/PhDN entered is already used in ISDN
7
extenstion(s), etc.
120 The CO or GCO Owner DN entered does not exist.
7
130
7
The PrimeDN does not exist in the system.

The sub-parameter values assigned to the FB are invalid.
120 The line number entered does not exist.
110 The maximum allowable value for GCO, POOL, or PhDN has

130 been exceeded.
140
7
The quantity of Flexible keys programmed exceeds the
7#
system's capacity.
System Error Codes
Station Programming Error Codes
Error Descriptions
B-7