Toshiba Strata CTX28 Programming Manual page 392

Telephone Button Programming
300 Series Programs
Table 13-31 Programs 318~320
Button Sequence
318 DID Intercept
Assignment
" ' C‚yq
,
318-00 ILG Number
C‚yq
n,
318-01 Type
A7 C‚yq
, n,
318-02 MOH Source
A7 C‚yq
, n,
318-03 GCO Destination
A7" C‚yq
, n,
318-04 Pooled Line Group
A7# C‚yq
, n,
318- Audio Day1/Day2/
05~07 Night Dst Type
A7$ A7&
~ , n,
Audio Day1/Day2/
Night Dst DN
C‚yq
n1,
13-68
Value(s)
n = 1~32 (CTX100)
1~50 (CTX670 Basic)
1~128 (CTX670 Exp.)
n = 1. No DID
2. Not Determined
n = 1. Quiet Tone
2. External 1 (default)
3. External 2
4. External 3
5. External 4
6. External 5
7. External 6
8. External 7
9. External 8
10. External 9
11. External 10
12. External 11
13. External 12
14. External 13
15. External 14
16. External 15
0~32 (CTX100)
0~50 (CTX670 Basic)
0~128 (CTX670 Exp.)
(default = 0)
0~32 (CTX100)
0~50 (CTX670 Basic)
0~128 (CTX670 Exp.)
(default = 0)
n = 1. No Data (default)
2. Dialing Digits
3. DISA
Tƒx…
4. Built-in modem
5. Night Bell
n1 = Up to 32 digits
This command assigns the DID Routing table when DID numbers are
undefined or not received.
Enter ILG number.
Select Routing Type.
Select Music On Hold
GCO Key Group number.
POOL Line Key Group Number.
Select the Audio/Speech call Day1 destination type.
•
No Data – no destination will ring when the line rings into the
system.
•
Dialing Digits – assigns the line to ring the directory number or
access code defined in the "Destination Digits" assignment
•
DISA – assigns the line to ring in as a DISA call. DISA dial tone
will be returned to the caller.
•
Modem – assigns the line to ring the remote maintenance modem
on the CTX processor. Used to call into the system with a CTX
WinAdmin PC and modem.
•
Night Bell – Assigns the line to cause the night relay to pulse
(one-sec.close/3-sec.open)
Enter the Destination Directory Number. Destination DN is only
required if the destination type is "Dialing Digits"
Strata CTX Programming - Part 3: Telephone Button Programming 6/04
Summary