All Isdn Trunk Trace; Event Trace Side Change - Toshiba Strata CTX28 Programming Manual

All ISDN Trunk Trace

Program start/stop of packaged detailed collection of event trace functions. This program is only available
in the telephone button programming mode.
Program Number(s): 905
Prerequisite Program:
Reference:
Access Sequence:
FB Name
Trace All ISDN
Trunks
A7
1. Press .
!
2. Select , or to turn on or off.
‚yq
3. Press twice to execute.
ÆÃÆÃ ‚yq
4. Press
5. Enter another program number to continue programming or press
mode.

Event Trace Side Change

This program enables you to manage your ISDN protocol trace. This program is only available in the
telephone button programming mode.
Program Number(s): 906
Prerequisite Program:
Reference:
Access Sequence:
FB Name
Side Change 01
A7
1. Press .
!
2. Select , , or
‚yq
3. Press to execute.
ÆÃÆÃ ‚yq
4. Press
5. Enter another program number to continue programming or press
mode.
When the CTX 670 stops logging data, it automatically sends data to the SmartMedia card. Run the
Note
Unmount command (Program 908) before removing the SmartMedia card to ensure complete data
transfer.
Strata CTX Programming - Part 3: Telephone Button Programming 6/04
"Format/Unmount SmartMedia"
"ISDN Trace Location"
Install SmartMedia card
Login to programming mode from your telephone button pad:
‚yqÃ Æ Æ ! "
At the PASSWORD= prompt, Enter your password and press
At the PROG= prompt enter
FB Summary
01
Output All ISDN Trunk Events to
SmartMedia.
to return to the = prompt.
PROG
"Format/Unmount SmartMedia"
Install SmartMedia card
Login to programming mode from your telephone button pad:
‚yqÃ Æ Æ ! "
At the PASSWORD= prompt, Enter your password and press
At the PROG= prompt enter
FB Summary
Enter desired parameter number.
"
to select parameter.
to return to the = prompt.
PROG
on page 13-105, "ISDN Trace Location"
on page 13-102 and "Event Trace Control"
.
($ ‚yq
and press .
1:On (default)
2:Off
ÆÃÆÃ ‚yq
on page 13-105
.
(% ‚yq
and press .
Value
1:Message
2:ISDN
3:Message+ISDN
ÆÃÆÃ ‚yq
Telephone Button Programming
900 Series Programs
on page 13-102,
on page 13-100
à ‚yq
.
Value LCD Prompt
1:ON
2:OFF
again to exit programming
à ‚yq
.
LCD Prompt
1:MESSAGE
2:ISDN
3:MESSAGE+ISDN
again to exit programming
13-103