Toshiba Strata CTX28 Programming Manual page 578

Software and Firmware Updates
IP Telephone/BIPU Firmware Update Procedures
Method 2: Update From a FTP Directory on the
WinAdmin PC
Prerequisites
1. Install the "File Transfer Protocol (FTP) Service" component under "Internet Information Services" on
the WinAdmin PC. This is not installed by default when installing IIS in Windows XP or 2000. See
create a Virtual FTP directory on the WinAdmin PC"
2. Create an FTP virtual directory and path to C:\CTX\WinAdmin\CTXIPUPDATE. The drive letter must
be the drive on which WinAdmin is installed. This can be done automatically by running the
"CreateFTPVdir" executable file provided by Toshiba. See
WinAdmin PC"
To create a Virtual FTP directory on the WinAdmin PC
Setup the Virtual FTP server function on the WinAdmin PC for IP Updates. These procedures were written
using Microsoft Windows XP, there may be some variance when using Windows 2000.
1. Install the MS Windows component FTP on your PC.
Using the Windows XP or 2000 professional installation CR-ROM, install the FTP Service on the
WinAdmin PC.
To verify FTP Service is installed, it should be located under: Control Panel > Administrative Tools >
Internet Information Services (IIS).
2. Go to CTXIpScripts and run "CreateFTPdir." This creates a virtual directory.
To get the "CreateFTPVdir" file go to C:\ctx\WinAdmin\CTXIpScripts.
Download the IP Firmware files and store them on the WinAdmin PC
1. Download the appropriate DIPXXXX and BIPUXXX firmware update files from TSD FYI, click
Technical Services > Software (Strata Systems) > CTX IP Firmware.
2. Copy the DIPXXXX and BIPUXXX to the CTXIPUPDATE folder on the WinAdmin PC
(C:\ctx\WinAdmin\CTXIPUPDATE\. These files will be accessed during the IP update processes.
Notes
Make sure the WinAdmin PC is not connected directly to the CTX processor network jack (see the
figure below).
Make all connections through the network (see the figure below).
Make sure the IP Telephones have the same subnet address as the CTX and WinAdmin - both must be
in the same domain.
CAUTION!
E-4
below.
Do not unplug BIPU, press the BIPU reset button or turn off the CTX power during the
BIPU program update process. Any of these operations will damage the BIPU kernel
software and require the BIPU software restoration process to allow the BIPU to
function.
below.
"To create a Virtual FTP directory on the
Strata CTX Programming - Part 4: Appendices 6/04
"To