Toshiba Strata CTX28 Programming Manual page 487

Program Code
48
51
540
52
80
20
541
52
80
33
550 49
80
551 32
49
570
50
49
571
50
33
573
80
33
576 33
80
33
33
51
577
52
80
80
579 -
52
580
80
Strata CTX Programming - Part 4: Appendices 6/04
Sub-
Occurred FB
parameter
An incoming destination number must be entered when After
7
Shift Type field is set to Dialing Digits.
7
The entered value conflicts with an existing number scheme.
The entered DN conflicts with an existing DKT, ISDN
7
extension, etc.
7
The entered DN does not exist.
A character(s) that is not permitted is included in the specified
7
code.
The entered DN conflicts with an existing DKT, ISDN

extension, etc.

The entered DN does not exist.
7 — 7'
The OLG entered is out of the range.
Two or more OLG numbers with the same value exist in the
7 — 7'
same group.
7 — 7'
The entered OLG number does not exist.
7 — 7"
The value entered is not permitted.
Registered Digit Length cannot be less than the Verified Digit
7
Length.
Registered Digit Length cannot be less than the Verified Digit
7!
Length.
7 — 7#
The same account code cannot be repeated.
7 — 7#
The same account code cannot be repeated.
7 — 7'
The door phone number entered is out of the range.
7
The entered Door Phone does not exist.
7
The tenant number entered is not "1".
7
The paging group number entered is out of the range.
7
The entered Paging Group does not exist.
7
The entered circuit type is out of range.
7
The Ckt Type number entered, CO, GCO or POOL is invalid.
7
The entered circuit number is invalid.
7
The entered circuit number is invalid.
The Device installed in the Circuit does not existed in the
7
system.
7
The entered station number does not exist.

No error occurs for this Program except for common errors.

The entered DN is not a VM extension.

No error occurs for this command except for common errors.
System Error Codes
Service Programming Error Codes
Error Descriptions
B-25