Creating New Feature Codes; Flexible Numbering Default Settings - Toshiba Strata CTX28 Programming Manual

Creating New Feature Codes

1. Click on the Create button.
2. Enter new feature/access code. Click Ok. WinAdmin will start a refresh cycle, when your complete
screen will change to a gray (edit mode) color and the feature/access code will be red.
3. From the Feature Name drop down menu select the feature to be assigned.
4. Submit your data.
Notes
• To range program feature/access codes use a "*" between a range of values and a "," for an additional
entry not in a range.
• System Date and Time Access Codes – These functions require CTX R1.02, MA227 or higher
software. The system date adjust code and system time adjust code is different for every system. The
defaults are #651 and #652 respectively.
Important! If you backup a CTX database (default.dat) with a CTX software that does not support Time/
Date access codes and then restore it to a CTX software that supports these access codes,
you must use this program to set the Time/Date access codes. This must be done to allow end
users to set the Time/Date from their LCD digital telephones.

Flexible Numbering Default Settings

Table 4-1 shows the default Flexible Numbering Feature and Flexible Numbering Plan code relationships.
Pressing the Flexible Numbering Plan code from any station enables users to directly access the Flexible
Numbering Feature. The Feature Index Codes will display on the LCD of the telephone once the Default
Access Codes are entered.
These three-digit Feature Index Numbers should not be confused with the Program 205 three-digit
Note
Button Codes.
Table 4-1 Flexible Numbering Plan Default Settings
No Data
ABR - Activate
ABR - Cancel
Call Park Orbits - Activate
Call Park Orbits - Park Answer (Retrieve Parked Call)
System Orbit Number
DND -Local Activation
DND -Local Cancellation
DND -Remote Activation
DND -Remote Cancellation
Door Lock Control -Unlock
Door Phones -Call
Flash -short
Flash -long
Group Paging -Invoke All Group Paging
Group Paging -Invoke Individual Group Paging
Answer for External Group Paging
Emergency Page -Invoke All Emergency Paging
Emergency Page -Invoke Individual Emergency Paging
Originate Call by Terminal Speed Dial (Index: 00-99)
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
Flexible Numbering Feature
102 Flexible Access Codes
Feature Default Programmed
Index Access Code
##
150
##!
151
""
170
"!
173
&—& (
174
%(
180
%(!
181
% (
182
% (!
183
!
190
$
191
#$
200
#$
210
"
220
"
230
$ "%
232
"&
240
"'
250
260
System
Value
4-5