Toshiba Strata CTX28 Programming Manual page 133

Cross Copy
This function is available only with CTX WinAdmin Release 2.1 software and above. Use the following
steps to cross copy keys from one station to the keys of another stations key pad:
1. From the Key Page, enter
the Prime DN.
2. Click Submit.
3. Click the Cross Copy
button. The Source and
Target Copy screen displays
(shown right). Enter the
"Copy To" PDNs
...or click Select to select the
target PDN.
4. From the Source DKT,
select key to be copied.
5. Click the Copy Now button.
The Detail report screen
displays.
6. Click Done. The Target
DKT with the copied key
displays.
7. Verify the key copied.
Setting the One Touch Button
Follow the step above 1~8 above to assign an FB as a One Touch button. Then complete the following
steps:
1. Double click the key assigned as One Touch.
2. The following dialog box displays
This dialog box is used to define each button with the One
Touch Data.
3. Enter the One Touch data, then click OK.
Example 1: Setting up a One Touch button to transfer to
Voice Mail.
Select the Cnf/Trn from the white box on the right, CNF
displays in the One Touch Data field. Then type #407 after
CNF displays in the One Touch Data box. It adds Cnf/Trn
#407 in the One Touch Data. Click OK. Then click Submit.
Example 2: To originate a call from the PDN, select the FK
as 01 if the PDN is on the first key, then add the telephone
number next to FK01 in the One Touch Data box.
Cancel clears the changes and takes you back to the previous
page.
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
Station
Assignment
5-19