Toshiba Strata CTX28 Programming Manual page 247

LCR/DR Screening
Program Number(s): 530 and 531
These programs enable and set up screening for DR and LCR.
1. Complete the "DR LCR Screening
Record Sheet"
2. Click Services > LCR/DR > LCR/
DR Screening.
3. Enter Program 530 and 531 data
...or click one of the following
buttons:
• List – view a summary list of
programmed Screened Dial
Strings or Behind Centrex
Access Codes.
• Copy – Enter a Screened Dial
String or Behind Centrex
Access Code in the field with
the corresponding name. Click
Copy to make a new assignment.
4. Click Submit.
530 DR LCR Screening Table Assignment
Prerequisite Program:
This command screens dialed digits for access codes such as Carrier Identification Codes or Behind
Centrex/PBX access codes. Used only in LCR calls.
F
IELD
00 Screening Dial String
01 Add String to Table
02 Destination Restriction
Action
03 Least Cost Routing
Action
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
on page D-38.
None
D
ESCRIPTION
Enter the string of external digits to be screened.
Possible values: Up to 7 ASCII characters (default = no value)
Add the Screening Dial String to the DR LCR Screening Table.
Possible values: Add or Delete (default)
Select DR Action.
Possible values: Bypass (default) or Skip and Apply
Bypass – Do not apply DR.
•
Skip and Apply – Apply DR to the dialed digits excluding the number of
•
digits specified in Skip Length.
Select LCR Action.
Possible values:
Apply – (default) Apply LCR to all of the external dialed digits.
•
Skip and Apply – Apply LCR to the dialed digits excluding the number of
•
digits specified in Skip Length.
Services
LCR/DR
9-31