Account Code Digit Length - Toshiba Strata CTX28 Programming Manual

Services
Destination Restriction

570 Account Code Digit Length

Prerequisite Program:
Accounting Codes need to be specified for the number of digits that are expected to be used for registering
a number. This allows dialing within Strata CTX to proceed automatically once the correct account code is
dialed. The following numbers are then dialed digits used for making the phone call.
A second length is provided to allow the number of digits to be used for verification of the code to be less
than the total code entered; thus, the code may contain two parts, one required and one part optional to the
user.
F
IELD
01 Verified Digit Length
02 Registered Digit Length
506 Verified Account Codes
Prerequisite Program:
This program adds or deletes entries in the DR Table associated with the DRL entered in
F
IELD
Account Code
01 Verified Flag
02 DRL
03 FRL
04 Network COS
9-36
None.
D
ESCRIPTION
The Verified Digit Length sets a number of digits to verify with a pre-set list.
This number may be the same or smaller than the account code digits set to be
entered for creating a complete accounting code.
Note This field is not changed, when
page 9-36 are registered.
Possible values: 4~15 (default = 4)
The Registered Digit Length sets a number for the digits to be entered to make
a complete accounting code entry.
Note The Registered Digit Length (
the Verified Digit Length (
Possible values: 4~15 (default = 6)
570 page 9-36
D
ESCRIPTION
Enter a valid accounting code that the user will be expected to dial. Digits 0~9
can be used.
Note The Account Code is set to the same digit length as the Verified Digit
Length in Program 570 above.
Possible values: Up to 15 ASCII characters (default = no value)
The Account Code Flag determines whether the number entered is to be used
as a verified account code or not. Some applications may allow users to dial an
accounting code which changes the restriction level for the call allowing it to be
placed.
Possible values: Set or No Set (default)
Note To delete a Verified Account Code set this field to No
The DRL assigned to an accounting code allows users to override their
stations assigned DRL enabling a call to be placed.
Possible values: 0~16 (default = 0)
The FRL assigned to an accounting code enables users to override the station
assigned FRL.
Possible values: 0~16 (default = 0)
Assign the Network COS to be used by this accounting code.
Possible values: 1~32 (default = 1)
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
"506 Verified Account Codes"
%
) must be greater than or equal to
%
).
Set.
on
Step 3 on 9-33..