Toshiba Strata CTX28 Programming Manual page 389

Table 13-28 Programs 303~315 (continued)
Button Sequence
315-04 Receive PAD
A7$ C‚yq C‚yq
, n, ,
315-05 Send Pad
A7# C‚yq
, n,
Table 13-29 Programs 316~317
Button Sequence
316 Shared D Channel
" % C‚yq
,
316-00 Channel Group
C‚yq
n,
316-01 Equipment Number
A7 C‚yq
, xxyyzz,
316-02 Trunk ID
A7 C‚yq
, n,
316-03 D Channel Provided
A7" C‚yq
, n,
316-04 Backup D Channel
Position
A7# C‚yq C‚yq
, n, ,
317 ISDN BRI Trunk
" & C‚yq
,
317-00 Channel Group
C‚yq
n,
Strata CTX Programming - Part 3: Telephone Button Programming 6/04
Value(s)
n = 1. None
2. Plus 6 dB
3. Plus 3 dB
4. Zero dB (default)
5. Minus 3 dB
6. Minus 6 dB
7. Minus 9 dB
8. Minus 12 dB
9. Minus 15 dB
n = 1. None
2. Plus 6 dB
3. Plus 3 dB
4. Zero dB (default)
5. Minus 3 dB
6. Minus 6 dB
7. Minus 9 dB
8. Minus 12 dB
9. Minus 15 dB
Value(s)
n = 1~32 (CTX100)
1~48 (CTX670 Basic)
1~128 (CTX670 Exp.)
xx = xx = Cabinet 01, yy = 03,
yy = 05, or 07 and zz = Channel
zz = 01 is always used to assign
RPTU parameters
or
xx = Cabinet 02~10,
yy = 01, 03, or 05 and
zz = Channel 01 is always
used to assign RPTU
parameters
n = 0~126
(default = 1)
n = 1. D-Channel
2. No D-Channel (default)
n = 1~128
(default = 24)
n = 1~32 (CTX100)
1~48 (CTX670 Basic)
1~128 (CTX670 Exp.)
Telephone Button Programming
Summary
Select the Receive PAD values.
Select the Send PAD values.
Summary
The PRI Interface can be extended to include an additional PRI card
to expand the total number of channels to 47 on a Channel Group.
This second PRI may optionally offer a backup D channel.
Channel Group Number.
Enter the ISDN RPTU equipment number as xxyyzz:
Example: If the RPTU is installed in cabinet shelf 5, slot 3, enter
050301.
Cabinet numbers:
CTX100: Select 01 for Base and Expansion cabinet.
CTX670: Select 01 for Base and 02~07 respectively for each
Expansion cabinet.
Slot numbers:
CTX100: Select 01~04 for Base slots and 05~08 for Expansion slots.
CTX670: Select 01~08 for Base slots and 01~10 for Expansion slots..
An identifier must be used as part of the addressing to communicate
with the PSTN which channel on which link is used the given call.
This identifier is assigned by the connected PSTN.
If a backup 'D' Channel is to be used, it needs to be enabled.
Channel Group Number.
The following program enables set up for ISDN related system
settings.
Enter the BRI channel Group Number.
300 Series Programs
13-65