Toshiba Strata CTX28 Programming Manual page 175

F
IELD
11 DNIS VMID Code
12 DNIS Name
15 DID/DNIS No. DTMF
VMID
16 Tenant Number
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
D
ESCRIPTION
Enter the VM mail box number which should answer calls for this DID/DNIS number.
Possible values: Up to 10 digits (default = no value)
Note This code is only sent if using SMDI VM integration in Program 580, 01. This
code will be replaced, after voice mail answers, by the DTMF code set in
Program 309, 15 DID/DNIS DTMF VMID code - if programmed; therefore, if
using Program 309, 15 code, this VMID code is not necessary.
This mail box number will be sent to voice mail on a DID/DNIS call that rings directly to
voice mail; and, on a direct DID/DNIS call to a DN that forwards to voice mail before it is
answered by the DN.
If a DID/DNIS call is answered by a station and then transferred to a DN that forwards
to voice mail, this mail box number of the DID/DNIS number or the forwarding DN's mail
box number will be sent to voice mail per Program 579, 01.
If this VMID code is not set, direct DID/DNIS calls will go to the VM general greeting
and DID/DNIS calls that forward from a DN to VM will go to the DN's VMID mail box.
This Voice Mail box number is added to SMDI packets direct and forwarded DID\DNIS
calls to voice mail as explained above.
Enter DNIS name. DNIS names can be assigned from the CTX WinAdmin (not from
programming phones).
Possible values: Up to 16 ASCII characters (default = no value)
Enter the VM mail box number which should answer calls for this DID/DNIS number.
Possible values: Digits 0~9,
up to 10 characters (default = no value).
This mail box number will be sent to voice mail on a DID/DNIS call that rings directly to
voice mail; and, on a direct DID/DNIS call to a DN that forwards to voice mail before it is
answered by the DN.
If a DID/DNIS call is answered by a station and then transferred to a DN that forwards
to voice mail, this mail box number of the DID/DNIS number or the forwarding DN's mail
box number will be sent to voice mail per Program 579, 01.
If this VMID code is not set, direct DID/DNIS calls will go to the VM general greeting
and DID/DNIS calls that forward from a DN to VM will go to the DN's VMID mail box.
This voice mail box number is sent to the VM port, as DTMF digits, after the VM port
answers a DID/DNIS call as explained above. These digits are sent to the VM port if the
CTX is set for SMDI or DTMF integration in Program 580, 01.
Enter the Tenant number to which this DID number should be assigned.
Possible values: 1~8.
and #. For a pause enter Px, where x=0~9 (seconds),
Trunks
309 Direct Inward Dialing
6-15