Table 13-5
Programs 103~107 (continued)
Button
Sequence
103-36
Allow Hook Flash
A7"%
Cyq Cyq
, n1,
103-37
Automatic Line Hold
A7"&
Cyq Cyq
, n1,
103-38
Can Originate OCA
A7"'
Cyq Cyq
, n1,
104
System Timers
#
Cyq
,
104-01
ACB Callback Timer
A7
Cyq Cyq
, n,
104-02
ACB Cancel Recall
Timer
A7!
Cyq Cyq
, n,
104-03
Park Recall Timer
A7"
Cyq Cyq
, n,
104-04
Camp-on Timer
A7#
Cyq Cyq
, n,
104-05
SMDR Valid Call
Timer
A7$
Cyq Cyq
, n,
104-06
Tandem Connection
#1
A7%
Cyq Cyq
, n,
104-07
Tandem Connection
#2
A7&
Cyq Cyq
, n,
104-08
Call Forward No Ans
Time
A7'
Cyq Cyq
, n,
104-09
Dial Input Timer
A7(
Cyq Cyq
, n,
104-10
Delay 1 Ringing Timer
A7
Cyq Cyq
, n,
104-11
Delay 2 Ringing Timer
A7
Cyq Cyq
, n,
104-12
Door Unlock Timer
A7 !
Cyq Cyq
, n,
104-13
9+11 Judgement
Timer
A7 "
Cyq Cyq
, n,
Strata CTX Programming - Part 3: Telephone Button Programming 6/04
Value(s)
n1 =
1. Enable (default)
2. Disable
n1 =
1. Enable
2. Disable (default)
n1 =
1. Enable
2. Disable (default)
n =
5~180 sec.
(default = 30)
n =
5~180 sec.
(default = 30)
n =
10~600 sec.
(default = 120)
n =
5~15 sec.
(default = 10)
n =
0~180 sec.
(default = 1)
n =
0~3600 sec.
(default = 300)
n =
0~180 sec.
(default = 30)
n =
1~180 sec.
(default = 20)
n =
0~60 sec.
(default = 20)
n =
1~60 sec.
(default = 12)
n =
1~60 sec.
(default =240)
n =
1~30 sec.
(default = 6)
n =
1~30 sec.
(default = 5)
Telephone Button Programming
Summary
The privilege to receive hook flash over CO Lines and to allow
telephones to hook flash.
The privilege to have an active call automatically held when
accessing another line.
Permission for others to call this station using Off-hook Call
Announce.
System timers set a variety of times to control calls and features for
the system.
The Automatic Callback timer sets the time (5 ~ 180 seconds) that the
callback will be attempted before being cancelled.
The Automatic Callback overall timer sets the time (5 ~ 180 minutes)
that a callback can be registered. Once the timer expires, the callback
will be cancelled.
The Park timer sets the length of time (10 ~ 600 seconds) a call can
remain in Park prior to a recall to the station that initiated the Park.
The Camp-on timer sets the time (5 ~ 60 seconds) needed to remain
off-hook prior to Camp-on being automatically activated.
The SMDR Answer timer sets a default time (0 ~ 180 seconds) for
when an outgoing call will be considered to be answered for SMDR
reporting when a true answer signal is not returned from the public
network. Setting the time short will include calls that may not be
completed, setting the time too long may exclude short calls that are
answered and terminated in a short time.
For Trunk-to-trunk connections which neither CO Line has release
supervision, a timer (0 ~ 3600 seconds) is needed to release the call
if no user monitoring has taken place.
Also used for CO line to RSTU port connections in which the CO line
has no supervision and the
device connected to the RSTU port does not hang up automatically
(see Prg200, PB34).
The Trunk-to trunk User Input Timer provides a time (0 ~ 180
seconds) to allow an external user to dial a digit to extend the
disconnect time when the connection is unsupervised. This feature
is used primarily with DISA service.
The System Call Forward No Answer timer (1 ~ 180 seconds)
specifies the time period that a phone will ring prior to invoking the
Call Forward operation.
Time system will wait for the beginning of DTMF input.
The Delayed Ringing 1 timer specifies the time (1 ~ 60 seconds) to
wait before applying ringing to the designated phones.
The Delayed Ringing 2 timer specifies the time (1 ~ 60 seconds) to
wait before applying ringing to the designated phones.
The Door Unlock Timer specifies the length of time (1 ~ 30 seconds)
the electrical signal is sent to the door for releasing the lock.
The 9+11 Inter-digital timer provides a timing value (1 ~ 30 seconds)
for the system to wait for additional digits to be dialed looking for the
911 or 9+911 dialed codes for treatment using the E911 procedures
rather than normal dialing treatment.
100 Series Programs
13-17