Toshiba Strata CTX28 Programming Manual page 409

Table 13-35 Programs 500~577 (continued)
Button Sequence
528 LCR Public Day of
Week Mapping Table
$ ' C‚yq
,
528-01 Monday
A7 C‚yq
, n,
528-02 Tuesday
A7 C‚yq
, n,
528-03 Wednesday
A7" C‚yq
, n,
528-04 Thursday
A7# C‚yq
, n,
528-05 Friday
A7$ C‚yq
, n,
528-06 Saturday
A7% C‚yq
, n,
A7& C‚yq C‚yq
528-07 , n, ,
529 LCR Route Plan Time
Zone Assignment
$ ( C‚yq
,
529-00 Route Plan Time
Zone
C‚yq
n,
529-01 Day Type for Time
Zone
A7 C‚yq
, n,
529-02 Time Zone
A7 C‚yq
, n,
529-03 Time Zone Start Time
A7" C‚yq
, hhmm, ,
C‚yq
530 DR LCR Screening
Table Assignment
$" C‚yq
,
530-00 Screening Dial String
C‚yq
n,
530-01 Add String to Table
A7 C‚yq
, n,
530-02 DR Action
A7 C‚yq
, n,
Strata CTX Programming - Part 3: Telephone Button Programming 6/04
Value(s)
n = 1. Weekday (default)
2. Weekend
3. Holiday
n = 1. Weekday (default)
2. Weekend
3. Holiday
n = 1. Weekday (default)
2. Weekend
3. Holiday
n = 1. Weekday (default)
2. Weekend
3. Holiday
n = 1. Weekday (default)
2. Weekend
3. Holiday
n = 1. Weekday (default)
2. Weekend
3. Holiday
n = 1. Weekday (default)
2. Weekend
3. Holiday
n = 1~64
n = 1. Weekday
2. Weekend
3. Holiday
n = 1. Zone1
2. Zone2
3. Zone3
hh = hour (00~23)
mm = minute (00~59)
(default = 0000)
n = Up to 7 digits
n = 1. Add
2. Delete (default)
n = 1. Bypass (default)
2. Skip and Apply
Telephone Button Programming
Summary
This command defines the days of the week as weekdays, weekend
days or holidays for LCR.
Select the Day Type to assign to this day.
Select the Day Type to assign to this day.
Select the Day Type to assign to this day.
This command creates a three-dimensional array (Day, Time & LCR
Group) for each Route Plan.
Select the LCR Route Plan Number to assign to this time zone.
Select a Day Type for which to define a time zone.
Select a Time Zone.
Enter the start time for the selected Time Zone (hhmm).
Note Enter your Day Type and Time Zone selections before
entering data in to this field.
This command screens dialed digits for access codes such as Carrier
Identification Codes or Behind Centrex/PBX access codes. Used only
in LCR calls.
Enter the string of external digits to be screened.
Add the Screening Dial String to the DR LCR Screening Table.
Select DR Action.
•
Bypass – Do not apply DR.
•
Skip and Apply – Apply DR to the dialed digits excluding the
number of digits specified in Skip Length.
500 Series Programs
13-85