Service; Disa Security Code - Toshiba Strata CTX28 Programming Manual

Service

Program Number(s): 311 and 319
These commands assign Assigns Direct Inward System Access (DISA) properties.
1. From the Program Menu, click
Trunk > Service. The Trunk
Services screen displays (shown
right).
2. Enter Program 311 data.
3. Enter Program 319 data.
4. Click Submit.

311 DISA Security Code

Prerequisite Program:
Assigns DISA parameters.
F
IELD
01 DISA Enabled
02 DISA Code
03 Response Timer
04 Idle Timer
05 Tie Line Access
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
None
D
ESCRIPTION
Enable DISA security code.
Possible values: Enable or Disable (default)
Enter DISA security code. Only required if DISA Security Code is marked as
necessary.
Possible values: Up to 15 digits (default = no value)
Choose the time, in seconds, the CTX will wait before answering an incoming DISA
call.
Possible values: 0~30 (default = 5)
Choose the time, in seconds, the CTX will wait for the first DTMF tones after
answering a DISA call.
Possible values: 0~60 (default = 10)
Enable this feature to allow DISA callers to access Tie lines when they call into the
system. (This feature is available with CTX R2.2 or higher and CTX WinAdmin
R2.2G.0 and higher.)
Possible values: Enable or Disable (default)
Trunks
Service
6-19