View Biou Control Relay Assignments - Toshiba Strata CTX28 Programming Manual

Services
External Devices

515 View BIOU Control Relay Assignments

Prerequisite Program:
This assignment is used to view functions of the four control relays on each BIOU PCB set in Program 105
12 Night Relay and 18 Night Bell Relay; Program 508 Door Lock Control Assignment; and Program 503
19 BGM Mute Relay. The system allows up to two BIOU PCBs to provide a total of eight control relays.
The control relays can be configured as an external BGM mute control, Night Bell control, Night Mode
Control, and Door Lock Control.
Notes
•
BIOU-1 relays are identified as Control Relays 1~4.
•
BIOU-2 relays are identified as Control Relays 5~8.
1. Click Services > External Device > BIOU
Relay Type.
2. Enter Program 515 data.
3. Click Submit.
F
IELD
00 BIOU (1 or 2)
01 BIOU Relay 1 or 5
02 BIOU Relay 2 or 6
03 BIOU Relay 3 or 7
04 BIOU Relay 4 or 8
9-72
100 page 4-1, and 105 page 4-13
D
ESCRIPTION
Enter the BOIU PCB number.
Possible values: 1 or 2 (default = no value)
Note BIOU 1 and BIOU 2 are assigned in Program 100 - Card Assignment.
View the function of BIOU1, control relay 1 or BIOU2, control relay 5:
View the function of BIOU1, control relay 2 or BIOU2, control relay 6:
View the function of BIOU1, control relay 3 or BIOU2, control relay 7:
View the function of BIOU1, control relay 4 or BIOU2, control relay 8:
Possible values: Not Use, Ext Paging, Night Bell, Night Relay or Door Lock (default =
no value)
•
NOT USE – if the relay is not used.
•
PAGE MUTE – External BGM mute control activates during an external page (see
"503 Paging Devices Group Assignments"
•
NIGHT BELL – Night Bell control activates during the system Night Mode only when
incoming CO lines ring (see
•
NIGHT RELAY – Night Mode Control activates continuously during the system Night
Mode (see "105 System Data"
•
DOOR LOCK – Door Lock Control activates when a telephone's Door Unlock button
is pressed (see "508 Door Lock Control Assignment"
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
on page 9-73).
"102 Flexible Access Codes"
on page 4-13).
on
on page 4-4).
page 9-70).