Toshiba Strata CTX28 Programming Manual page 468

System Error Codes
Station Programming Error Codes
Program Code
52
54
80
80
202
96
96
98
33
49
51
203
51
52
80
33
49
52
204
80
98
98
33
205
33
33
33
33
B-6
Sub-
FB
parameter
The additional ISDN extension number cannot be registered.
7!%— 7"!
The number is already in use by a DKT extensions, etc.
The quantity of lines, ISDN channels and PDNs entered
7
exceeds the number of ports licensed with this processor.
7
The DN entered is invalid.
A PCB without ISDN extension settings allowed' is designated
7
for the PCB connecting the ISDN extension(s) selected.
The number of channel group exceeds the system capacity
7!
when ISDN station is registered.
The quantity of lines, ISDN channels and PDNs entered
7
exceeds the number of ports licensed with this processor.
The quantity of station speed dial bins entered exceeds the
7"$
system's capacity.
7
The new DN is not assigned.
The new DN value conflicts with an existing value DN, PhDN,
7
etc.
The Primary DN entered conflicts with a value of an existing
-
numbering scheme.
The new DN value conflicts with an existing numbering
7
scheme value.
7
The new DN value conflicts with existing group extensions.
7
The new DN value does not exist.
7 &
The Call History memory size entered is wrong.
The number of attendant consoles exceed the number
7
specified in the system.
7
DKT is not assigned to DN (ISDN, etc.).
7
The DN entered is an extension number that does not exist.
7#
Allowable Feature Button number is exceeded.
7 &
Allowable Call History Memory size is exceeded.
100 Sub-parameters must be assigned.
110
7
120
130
140
120 The line number entered is out of range for the system's
capacity.
130 The GCO key group/index entered is out of the range.
140 The POOL group entered is out of the range.
530 The BGM number entered is out of the range.
Error Descriptions
Strata CTX Programming - Part 4: Appendices 6/04