Worksheet 1 - System Pcb Assignment Guide; Configuration Rules - Toshiba Strata DK40 Installation & Maintenance Manual

Worksheet 1 – System PCB Assignment Guide
Worksheet 1 – System PCB Assignment Guide
Customer:
Location:
This worksheet helps you configure the system. Use the following table to record the
hardware that comprises the system. Consult the following Configuration tables when you fill
out Table 1-11
DK40 PCB Configuration
Table 1-11
Slot
00
Number
None
PCB
Type
K5RCU
None
Options
DTMF

Configuration Rules

Stratagy DK can be installed in place of PDKU2, PEKU, or PSTU to provide two, four,
six or eight built-in Automated Attendant/Voice Mail circuits. Always install Stratagy
DK in slot 15, 16, or 17; do not install Stratagy DK in slot 18. Program the Stratagy VM
ports as if they were standard telephone ports connected to an external VM device. All
models of Stratagy DK use up eight station ports.
PEKU can be installed in place of PDKU2, PSTU2, or RSTU2 to provide eight-
electronic telephones instead of digital or standard telephones.
K5RCU must be installed when using built-in automated attendant, standard telephone
ports, tie lines, or DISA Lines.
If required, install PIOU and PIOUS in last available slots starting with slot 18.
Speaker OCA can only be installed on digital telephone ports in the DK40 Base KSU
and slots 15 and 16 of the DK40 Expansion KSU (24 maximum).
Each Tie line PCB installed provides four Tie lines (PEMU, PACU), and has station port
range 028~039 assigned to Tie lines 1~12 respectively for programming purposes.
Strata DK40 I&M Manual Spring 1999
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
below. See Figure 2-11 on Page 2-16
Base Cabinet
11 12
None
DKT TCOU
TBSU
None
Loop Start
OCA/
DSS/ Exchange
RPCI/
ISDN
BRA
for DK40 universal slot locations.
13 14
None None
KSTU3 N/A
None None
SLT N/A
DK40 Configuration
Expansion Cabinet
15 16 17 18
1-11