Toshiba Strata CTX28 Programming Manual page 375

Table 13-25 Programs 208~218 (continued)
Button Sequence
216 Emergency Ringdown
Assignment.
% C‚yq
,
216-00 Primary DN
C‚yq
n,
216-01 Emergency Ringdown
A7 C‚yq
, n,
216-02 Emergency Ringdown
Timer
A7 C‚yq
, n,
216-03 Destination
A7" C‚yq C‚yq
, n, ,
217 ISDN Station Data
& C‚yq
,
217-00 Primary DN
C‚yq
n,
217-01 Station Name
A7 C‚yq
, n, ,
217-02 Dial Method
A7 C‚yq
, n, ,
217-03 System Call Forward
A7" C‚yq
, n, ,
217-04 CF Password
A7# C‚yq
, n, ,
217-05 Door Phone Override
DND
A7$ C‚yq
, n, ,
217-06 Emergency Call
Group
A7% C‚yq
, n, ,
217-07 COS Override Code
A7& C‚yq
, n, ,
217-08 Display DN
A7' C‚yq
, n, ,
217-09 VMID Code SMDI
A7( C‚yq
, n, ,
217-12 Name Display
A7 C‚yq C‚yq
, n, ,
218 Station Hunt Group
Assignment
' C‚yq
,
218-00 Hunt Group Number
C‚yq
n,
Strata CTX Programming - Part 3: Telephone Button Programming 6/04
Value(s)
n = Up to 5 digits
n = 1. Enable
2. Disable (default)
n = 5~60
(default = 0)
n = Up to 5 digits
n = Up to 5 digits
n = Up to 9 digits
n = 1. Dial Tone (default)
2. Entry Tone
3. No Tone
n = 0~32
(default = 0)
n = Up to 4 digits
n = 1. Enable
2. Disable (default)
n = 1~8
(default = 1)
n = 1. Enable
2. Disable (default)
n = Up to 5 digits
n = Up to 10 digits
Digits 0~9, * and #
n = 1. Enable
2. Disable
n = 1~640
Telephone Button Programming
Summary
Assigns Emergency Ring Down parameters to Primary DNs.
Enter the Primary DN.
Enable an Emergency Ringdown Number.
Enter the length of off-hook time that will cause a DN to originate an
Emergency
Enter the destination DN for the Emergency Ringdown.
ISDN stations need a set of parameters to be set to define its
capabilities. These include a Name when calling display phones, Call
of Service settings, etc.
Enter Primary DN.
Enter a name for this station.
Select the audible tone when dialing.
Select the System Call Forward assignment for this station.
Protect the System Call Forward settings by creating a password.
Enable the Door Phone ringing indicator to override Do Not Disturb.
Select this station's emergency call group.
Enable Class of Service override.
Enter the DN to be displayed on the LCD.
Enter the voice mail box number that should answer calls when this
PDN calls voice mail; or, when this PDN is called and then forwards to
voice mail (this number is prefixed by codes in Program 579, 11~16).
Note This VMID code is sent to the voice mail device in SMDI
packets or DTMF tones on direct and forwarded calls to the
PDN. See Program 580 for SMDI or DTMF choice.
Whether to put the user name in the list display.
This assignment configures station DNs to hunt groups and assigns
the order of rotation in which the DNs are hunted.
Enter an existing Hunt Group number or use the List, Add, Append,
Modify, or Delete buttons as described above.
200 Series Programs
13-51