Toshiba Strata CTX28 Programming Manual page 582

Hide thumbs Also See for Strata CTX28:
Table of Contents

Advertisement

Software and Firmware Updates
IP Telephone/BIPU Firmware Update Procedures
From the WinAdmin PC perform the BIPU update
Important!
1. Select IP Telephone > BIPU Program Update.
2. Select the BIPU card slot and BIPU-M card type.
Note
Only BIPU-M can be updated. Only BIPU-M card slots will be shown with WinAdmin 2.1F or
higher. The BIPU type selection is not required.
3. Select Other (radio button).
4. Enter the ftp user login Name and Password.
5. Enter the IP address external ftp server.
6. From Data Directory box enter: CTXIPUPDATE
7. From File Name box enter: BIPUXXX
8. Click Start and observe the update status: Getting Updated file\Updating\Finished
Updating\Resetting\idle.
Notes
9. After the update is complete, select IP Telephone > BIPU Configuration. Check the BIUP version
numbers to verify they have been updated properly.
10. Press the BIPU reset button for proper initialization.
IP Telephone Update
Important!
Store the IP update files on the external ftp sever
1. Create an ftp directory and name it CTXIPUPDATE
2. Copy the DIPUXXXX update files to CTXIPUPDATE directory (XXX is the BIPU firmware version
level).
From the WinAdmin PC perform the update
Important!
1. Select IP Telephone > IPT Program Update.
2. Select the IP PDN to be updated.
3. Select Other (radio button)
4. Enter the external server ftp user login Name and Password.
5. Enter the IP address external ftp server.
6. From Data Directory box enter: CTXIPUPDATE
E-8
The BIPUs and IPTs will automatically be disabled while Update takes place and return to
the idle state when Update is complete (if they were in the idle state when the Update was
started).
It could take 1 to 5 minutes to update the BIPU
If an error occurs, recheck file names, locations etc. and try again.
Complete all
"Prerequisites"
The BIPUs and IPTs will automatically be disabled while Update takes place and return to
the idle state when Update is complete (if they were in the idle state when the Update was
started).
on
page E-7
before you do the following.
Strata CTX Programming - Part 4: Appendices 6/04

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Strata ctx670Strata ctx100-sStrata ctx100

Table of Contents