Mapping; Network Cos Mapping Table - Toshiba Strata CTX28 Programming Manual

Services

Mapping

Mapping
System Availability: Not available with CTX28
Program Number(s): 657, 658, 659 and 660
The following programs map network and primary COS, DRL, FRL and QPL settings to each other.
1. Complete the
Record Sheets"
2. Click Services > Networking >
Mapping.
3. Enter Program 657 data.
4. Enter Program 658 data.
5. Enter Program 659 data.
6. Enter Program 660 data.
7. Click Submit.

657 Network COS Mapping Table

System Availability: Not available with CTX28
Prerequisite Program:
This table maps a Network COS received as part of a Traveling Class Mark to a local Class of Service for
access to local services. There is no translation of Outgoing Network COS.
F
IELD
Ntwk COS
01 Local COS
02 Off-hook Call Announce
03 System Speed Dial
04 COS Override
05 TGAC Override
9-58
"Network Mapping
on page D-50.
None
D
ESCRIPTION
Enter the Network COS to be mapped.
Possible values: 1~32 (default = no value)
Enter the Local COS to be used in place of the received Network COS.
Possible values: 1~32 (default = no value)
Choose whether an incoming call with this Network COS can activate OCA.
Possible values: Enable or Disable (default)
Choose whether an incoming call with this Network COS can use a System
Speed Dial number to make an outgoing call.
Possible values: Enable or Disable (default)
Choose whether an incoming call with this Network COS can use Class of
Service Override.
Possible values: Enable or Disable (default)
Choose whether an incoming call with this Network COS can override local
Trunk Group Access Control. Typically an attendant function.
Possible values: Enable or Disable (default)
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04