Toshiba Strata CTX28 Programming Manual page 480

System Error Codes
Trunk Programming Error Codes
Program Code
33
48
49
49
318
80
82
82
96
33
319
48
33
54
320
80
33
321
80
33
80
80
322
80
80
82
96
B-18
Occurred Sub-
FB parameter
7 $
The pause assignment is wrong.
7$×
No incoming destination number is assigned for the required
7 
parameter.
7"
The selected GCO conflicts with an existing ILG number.
The selected Pool Line Group conflicts with an existing ILG
7#
number.
7"
The entered GCO key group does not exist in the system.
7
The selected ILG number does not exist in the system.
The selected ILG number does not exist in the system. The
7
number of ILGs exceed the system capacity.
7"
The number of allowable GCO or POOL key group
7#
assignments has been exceeded.
7 — 7"
The destination number entered is wrong.
7 — 7"
The destination number is not assigned.
7
The entered equipment value is invalid.
The quantity of lines, ISDN channels and PDNs entered
7 — 7"
exceeds the number of ports licensed with this processor.
The circuit for the designated PCB must be an assigned ISDN
7
primary trunk.
7
The OLG entered is out of the range.
7
The entered OLG number does not exist in the system.
The Group CO or Pool Line Group Destination is out of range

(1~128).
7
The entered OLG number does not exist in the system.
7
The designated extension number does not exist in the
7!
system.
7
The entered GCO value does not exist in the system.
7!
7
The entered POOL value does not exist in the system.
7!
7
The OLG entered is out of the range.
7"
The allowable system DID assignments has been exceeded.
Error Descriptions
Strata CTX Programming - Part 4: Appendices 6/04