Toshiba Strata CTX28 Programming Manual page 472

System Error Codes
Station Programming Error Codes
Program Code
82
82
213
96
98
33
49
50
51
214 52
80
80
96
98
215 33
33
33
33
33
33
33
33
48
49
B-10
Sub-
FB
parameter
The additional information assigned to the Feature Button is

invalid.
- 120 The line number entered does not exist.
110 The allowable number of GCO, POOL or PhDn has been

130 exceeded.
140
The quantity of Flexible buttons programmed exceeds the
-
system's capacity.
7 — 7'
The equipment number entered is out of the range.

The designated circuit is already in use.
Multiple DSSs cannot be assigned to the same Shelf/Slot/

Circuit.
The entered DN does not exist in the system (the entered

value conflicts with an existing extension number or
numbering plan).

The entered value conflicts with an existing numbering plan.
7
The designated Prime DN does not exist in the system.
The designated PCB and extension combination is not
7 — 7'
allowed.
The number of DSS consoles entered exceeds the system's
7 — 7'
capacity.
The number of DSS buttons entered exceeds the system's

capacity. This error can occur with PB1~PB8

The add-on module number is out of the range.
100 The sub-parameters for Key Number field must be assigned.
110
7
120
130
140
The line number entered is out of range for the system's
- 120
capacity.
- 130 The GCO key group/index entered is out of the range.
- 140 The POOL group entered is out of the range.
- 530 The BGM number entered is out of the range.
- 540 The door lock number entered is out of the range.
- 900 The application number entered is out of the range.

Essential sub-parameter values must be entered.
Two or more PhDNs with the same value are registered to
7
110
one extension.
Error Descriptions
Strata CTX Programming - Part 4: Appendices 6/04