Toshiba Strata CTX28 Programming Manual page 358

Telephone Button Programming
200 Series Programs
Table 13-15 BRI Bearer Capability of ISDN
Speech
3.1kHz Audio
7kHz Audio
Circuit Mode
Unrestricted Digital Information
Table 13-16 Programs 203~204
Button Sequence
203 Change DN
!" C‚yq
,
203-00 Primary DN
C‚yq
n,
203-01 Enter new DN
A7 C‚yq
, n1,
204 DKT Parameters
!# C‚yq
,
204-00 Primary DN
C‚yq
n,
204-01 Station Type
A7 C‚yq
, n,
204-02 Key Strip Pattern
A7! C‚yq
, n,
204-03 Key Strip Type
A7" C‚yq
, n,
204-04 Add on Modules
A7# C‚yq
, n,
204-05 Tone 1st /Voice 1st
A7$ C‚yq
, n,
204-06 OCA Type
A7% C‚yq
, n,
13-34
Bearer Services
Value(s)
n = Up to 5 digits
n1 = Up to 5 digits
C‚yq
,
n = Up to 5 digits
n = 1. Extension
2. Attendant
n = 1. Pattern1
2. Pattern2
3. Pattern3
4. None
n = 1~24
n = 1. None
2. One Unit
3. Two Units
n = 1. Tone
2. Voice
n = 1. Handset
2. Speaker
Bellcore
Nat'l ISDN
X
X
64 kbps X
Rate adaptation
X
from 56 kbps
2x64
This command changes DN.
Enter DN to change.
Enter new DN.
This command assigns DKT digital telephone data.
Primary DN
For CTX R1 this must be set to "Extension." The "Attendant" option is
not available for this release.
Default key strip patterns for digital telephones. The selected Pattern
is applied to the "Key Strip Type" parameter (DKT3014 uses only
Pattern 1 or None).
•
None - applies PDN to button 01 and blank to all other buttons.
• Pattern 1 - applies PDN to button 01, plus line buttons and DND.
•
Pattern 2 - applies PDN to button 01, plus line buttons, One-
Touch buttons and DND.
•
Pattern 3 - applies PDN to button 01 and blank to all other
buttons.
Apply 1, 3, 10, 14, or 20 button keystrip type to digital telephones.
•
1 and 3 button keystrips apply to DKT2001 and DKT3001.
•
10 button keystrips apply to DKT2010 and DKT3010.
• 14 button keystrips apply to the Large LCD DKT3014
•
20 button keystrips apply to DKT2020 and DKT3020.
The Number of Add-on Modules assigned to this station.
Set PDN to have Tone First or Voice First signaling when called.
For each iES32 PDN, set to "Tone First", if set to Voice First iES32 will
not answer.
Select the OCA type. This field must be programmed with Auto OCA
Originate below.
Strata CTX Programming - Part 3: Telephone Button Programming 6/04
ETSI TTC
X X
X X
X X
X X
X X
Summary